Anycubic Photon Mono X LCD Screen Replacement
Frequently Bought Together
The original LCD screen used in the Anycubic Photon Mono X series has been discontinued. To continue supporting Photon Mono X users, we sourced and tested a new 8.9-inch replacement LCD solution that allows these printers to remain in use.
Please note that the new replacement screen has a different UV light transmittance from the original screen. Its actual light transmittance is lower, so a longer exposure time may be required under the same printing conditions.
We recommend running an exposure test and recalibrating your exposure settings after installing the new screen before starting normal prints. Because the required exposure time may be slightly longer, the total printing time may also increase accordingly.
Anycubic Photon Mono X LCD Screen Replacement
It is a replacement screen for the Anycubic Photon Mono X resin 3D printer. This 8.9-inch 4K monochrome LCD replacement is designed to keep Photon Mono X printers in service and provide stable UV exposure for high-resolution resin 3D printing.
Key Features of the Photon Mono X LCD Replacement
- Compatible printer: Anycubic Photon Mono X
- LCD type: Monochrome LCD
- Screen size: 8.9 inches
- Resolution: 4K
- Purpose: Replacement LCD screen for resin 3D printing
- Included installation parts: Adapter board and required cable
Replacing a damaged or worn LCD screen can restore the printer's UV exposure function and allow your Anycubic Photon Mono X to continue producing detailed resin 3D prints.
Anycubic Photon Mono X LCD Screen Replacement Guide
Watch the installation and replacement video to learn how to install the replacement LCD screen on the Anycubic Photon Mono X.
What's Included
The package includes the 8.9-inch 4K LCD screen together with the adapter board and cable required for installation.
Included parts:
- 8.9-inch 4K monochrome LCD screen
- Adapter board
- Required connection cable
The correct cable and adapter configuration is important when installing an LCD replacement. Please use the cable and adapter supplied with the replacement screen where applicable.
Before Installing the LCD Screen
- Confirm that your printer is Anycubic Photon Mono X.
- Follow the installation instructions carefully to avoid damaging the LCD panel or connection cable.
- After installation, perform an exposure test and recalibrate the exposure time before normal printing.
LCD screens are precision electronic components. Handle the panel carefully during installation and avoid excessive pressure, bending, impact, or contact with resin.
After-Sales and Warranty Information
Each screen undergoes an exposure calibration test before leaving the factory to help ensure product quality.
Because LCD screens are fragile electronic components, please inspect the screen immediately after delivery. If the screen arrives with visible cracks or transportation damage, contact us within 3 days of receiving the package. We will provide a replacement or refund according to the after-sales policy.
After installation and use, the LCD screen is not covered by warranty because it is considered a consumable component. Its service life can be affected by resin type, printing settings, printing frequency, operating conditions, and other environmental factors.
Proper installation, cleaning, and handling are recommended to maximize the service life of the replacement LCD screen.
Anycubic Photon Mono X 4K LCD Screen Replacement
If you are looking for an Anycubic Photon Mono X LCD screen replacement, this 8.9-inch 4K monochrome LCD is a tested replacement solution for the Anycubic Photon Mono X resin 3D printer. It replaces the discontinued original screen and may require a slightly longer exposure time due to differences in UV light transmittance.