Sale

ChiTu L V3 board for mono screen mSLA/LCD 3d printer

$42.98$72.98

ChiTu L V3 supports 6.08inch and 5.96inch MONO and 5.5inch RGB LCD screen.

Clear
View cart

Also bought together

Description

SLA Controller Board ChiTu L 5.5 V3  For Creality LD-002R Printer With 32Bit ChiTu System For LCD 3D Printer Motherboard

The firmware option is FPGA firmware come with board, you can also update yourself from our download page.

Parameters:

Mainboard size:120*85mm

Microprocessors:STM32F407(168Hz)

Input voltage:12~24V 5~15A

Motor driver:Allegro A4988(2 extended signal)

Color touch screen:2.8/3.5/4.3/5.0 inch TFT color touch screen

Supported LCD screen:5.5inch /6.08inch monochrome 2k

Data interface:U disk,Network port,WIFI

Supported file format: ctb

Interface type:MIPI

Slice software:CHITUBOX

 

Shipping list

1.only board controller board + gifts

2. controller board + 2.8/3.5/4.3/5.0 touch screen + 50cm FFC cable + gifts

Notice:

The touch screen can only be used for ChiTu controller board.Other screens may not match ChiTu controller board.

ChiTuL5.5 V3 is our major board for small size monochrome LCD, it supports different version of 

*Support DXQ 6.08inch monochrome LCD resin panel 1620*2560(ZX608XI5249727/DXQ608-X04)

*Support Duobond 5.96inch monochrome LCD resin panel 1620*2560(RV059FBB-N80)

 

 

Chitusystems compatibility chart

Screen Interface V1 V2 V3 K1 H1
5.5‘’-RGB-1440*2560 MIPI/03
5.5‘’-RGB-1440*2560 MIPI/04
5.5‘’-RGB-2160*3840 MIPI
5.5‘’-MONO-1080*1920 MIPI
5.96‘’-MONO-1620*2560 MIPI
6.0‘’-RGB-1440*2560 MIPI
6.08‘’-MONO-1620*2560 MIPI/04
6.23‘’-MONO-3840*2400 MIPI
8.9‘’-RGB-2560*1600 MIPI
10.1‘’-RGB-2560*1600 MIPI
12.5‘’-RGB-3840*2160 eDP
13.3‘’-RGB-3840*2160 eDP
15.6‘’-RGB-3840*2160 eDP
chitu board

Notice

 

Installing power supply:

As shown below, connect the power supply wire with -12V/24V+ port.

Please note: reverse connection of the positive and negative poles will make damage to the motherboard !!!

chitu board

You can also Click here  to find out the difference between Mono LCD and RGB LCD.

6.08 mono LCD screen
6.08 mono LCD screen

The V3 board can only work with x04 port LCD, please DO NOT connect sharp03 or DXQ608-03 with it, it will damage the board U3 chip.

If your Z-axis direction is not right, you can edit the parameter file M8004 to fix it,

Or print this file we edited for you directly, and download it here.

17 reviews for ChiTu L V3 board for mono screen mSLA/LCD 3d printer

5.0
Based on 17 reviews
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. 5 out of 5

    Ellie Julius

    Country: RU
    Color:6.08monochrome
    Size:5.0touchscreen

    Works! Came with a problem with the MIPI connector. But if it is pressed, then the signal on the LCD goes. The service works clearly!

    (0) (0)
  2. 5 out of 5

    Tandy Hoyte

    Country: UK
    Color:6.08monochrome
    Size:3.5touchscreen
    (0) (0)
  3. 5 out of 5

    Xose Mendez

    Country: NL
    Color:boardwith3.5display
    Size:TMC2209driver
    (0) (0)
  4. 5 out of 5

    Finn Junkermann

    Country: ES
    Color:boardwith3.5display
    Size:TMC2209driver
    (0) (0)
  5. 5 out of 5

    Germain Beaumont

    Country: MY
    Color:6.08monochrome
    Size:3.5touchscreen
    (0) (0)
Add a review

Cancel

Additional information

Weight 0.7 kg
Firmware Option

, , ,

Touch screen Size

2.8 inch, 3.5 inch, 4.3inch, 5.0 inch, only board

V3-driver

Default A4988 driver, TMC2209 Driver