Sale
ChiTu L HDMI H1 for 4k MSLA/LCD resin 3d printer
$74.68 – $94.67
ChiTu L HDMI H1 with STM32 ARM for 4k MSLA/LCD resin 3d printer.
- Description
- Reviews ( 10 )
- Additional information
- Tracking
Description
Introduction：
Chitu L HDMI H1 is a master control solution for LCD/DLP 3D printers. It is equipped withTM32F407+ FPGA chips, support for more projectors, and resin screens with the HDMI interface.Experience is better than existing printers on the market.
Paremeters:
Controllerboard size：120*85mm
Microprocessors：STM32F407(168Hz)
Input voltage:12~24V 5~15A
Motor driver：Allegro A4988
TFT color touch screen：2.8/3.5/4.3/5.0 inch
Supported LCD: 5.5/12.5/13.3/15.6 4K
Data interface:U disk, Network port, HDMI connector
Supported file format: ctb
Slice software：CHITUBOX
Shipping list：
1.only board： controller board + gifts
2. controller board + 2.8/3.5/4.3/5.0 touch screen + 50cm FFC cable + gifts
Precautions:
Please pay attention to the LCD screen models supported by this motherboard.
If you use other models of the corresponding size, the motherboard may be damaged!!
Please contact ChiTu’s technical staff to confirm before using other LCD screens.
We will not be responsible for any damage caused to the controller board by unauthorized use of the LCD screen.
The touch screen can only be used for ChiTu controller board. Other screens may not match ChiTu controller
board.
Works with 5.5 4k RGB screens.
Works with 13.3”/12.5” 4k RGB screens.
The firmware option is FPGA firmware come with board, you can also update yourself from our download page.
All the supported firmware of LCD screens: Download
Feel free to join our Facebook group to discuss.
Additional information
| Weight | 0.8 kg |
|---|---|
| Firmware Option | |
| Touch screen Size | 2.8 inch, 3.5 inch, 4.3inch, 5.0 inch, only board |
Cassey Odle –
Gayla Tincher –
All Well
the board and díasplay work
packaging * * * * * excellent
shopping time * * * * * excellent
Windy Milnes –
Ok
Kathi Okamura –
Antonio Levine –