GUI page overview
- The first page after the controller board start working
- Tool: enter “Tool” page
- System: enter the “System” page
- Print: enter “Print” page
- Include exposure test, component calibration etc.
- Manual: Enter “Move Z axis” page
- Exposure: Enter “Exposure testing” page
- Set Z=0: pop up window for Z to zero
- Stop: to stop all current commands and mechanical movements
- Clean: enter “Resin vat clean” page
Move Z(printing plate) with different distance by manual
①: Unselected value unit of stepping travel
②: Unselected value unit of stepping travel
③: Reset the platform to default height you set.
④: Move Z up, Z-axis will move up the current value unit you choose.
⑤: Move Z down, Z-axis will move down the current value unit you choose.
⑥Stop: click to stop the Z moving
①： Exposure image, exposure image in the test state
②： Status info, remind the user the printer is currently in the exposure test status.
Exposure time setting for clean the resin vat
①：exposure time, is an integer, unit second and the default setting is 200s, click to enter the “parameter input” page.
②：increase“exposure time”, add one second every click.
③：decrease“exposure time”, cut one second every click.
④：Next button, click will save the current setting and enter the exposure page.
①：Clean image, exposure image in vat clean state.
②：Status info, remind user the printer is current in the vat clean exposure status
list the file and folders from local or U disk
Tag ①：Back to the upper page, click to exit the current folder, and return to the upper page.
Tag ②：Enter to a new folder, click to enter the folder.
Tag ③：Model or files, click to enter the “file info” page.
Tag ④：Means the location of the file, click to switch the storage location.
This icon means the file is read from the U disk.
This icon means the file is read from the local storage.
Tag ⑤：Last page, click to flash the current list and show the previous first four files or folders.
Tag ⑥：Next page, click to flash the current list and show the first four files or folders.
Display the detailed information of the file, you can delete, print the file on this page.
Tag ①：File name and file format;
Tag ②：Preview image, to display the file as 3D image or other forms;
Tag ③：Delete file, click to choose if delete the file;
Tag ④：Start printing, click to print the file;
Display the detailed information during printing, include slicing images, layers, printing time, etc, at
the same time you can pause, stop or enter the setting page.
Tag ①： Slicing image currently printed;
Tag ②： File name currently printed;
Tag ③： Print time remaining, the time needed to finish printing, it is better to check after the bottom
Tag ④： Printed time, the time you start printing.
Tag ⑤： The number of slicing layers, former are layers has printed, the latter is total layers volume.
Tag ⑥： Stop printing, click to stop the printing
Tag ⑦： pause/resume printing.
Click the button will pause the current print
Click the button will resume print from the last layer.
Tag ⑧： Click to enter the “printing setting” page.
Display the core parameter in this printing file, such as bottom layers; exposure time etc.
Bottom layers: the bottom layers during the printing process, click to enter the “parameter input” page.
Bottom exposure time: the bottom layer exposure time during the printing, click to enter “parameter
Exposure time: the exposure time during the printing, click to enter the “parameter input” page.
Light-off delay: The light-off delay is the time during LED light off from the last layer to the next layer,
this setting is for extra preparing time before the next layer start exposure, click to enter “parameter
Adjust and save the current parameter setting.
Tag ①： Current parameter
Tag ②： Keyboard input area
Tag ③： Delete parameter，delete one value from right to left per click
Tag ④： Save parameter, click to save the current setting and back to the last page.
Include all the function except core function. Such as system info, after-sale etc.
Information page: Click to enter “information” page
Network: click to enter “Network” page
Service: click to enter “Service” page
Language: click to “language” page
Calibration: click to “calibration” page
Display the key information of board.
Tag ①： The series and model number of this controller board.
Tag ②： The serial number of this board.
Tag ③： The firmware name and version of this board.
Tag ④： Beep on/off,
The official after-sale and tech support information