Skip to content

Welcome to Chitu Systems! Brand New Experience Always For You!

Get Your 5% Discount On Your First Order! Code: Chitu 2024

Anycubic Photon Ultra 3d Resin printer, DLP tech!

Before knowing about Anycubic Photon Ultra 3d  printer,You need to know what is DLP first.

What is Dlp 3d printing
What is Dlp 3d printing

 

DLP is the abbreviation of “Digital Light Procession”. That is to say, the image signal is projected into light after digital processing. It is based on the digital micromirror element developed by Texas Instruments, DMD, to complete the visual digital information display technology. The basic principle of DLP3D printing technology is that the digital light source performs layer-by-layer projection on the surface of the liquid photosensitive resin in the form of surface light, and the layers are cured and formed.

How does the DLP 3D Printer work?

Anycubic Photon Ultra 3d
Anycubic Photon Ultra 3d printer

 

The DLP 3D printer contains a liquid tank that can hold the resin, which is used to hold the resin that can be cured after being irradiated by the ultraviolet light of a specific wavelength. The DLP imaging system is placed under or above the liquid tank, and its imaging surface is just at the bottom of the liquid tank The resin level, controlled by energy and graphics, can cure a thin layer of resin with a certain thickness and shape each time. A pulling mechanism is set above the liquid tank. After each cross-section exposure is completed, it is pulled up or lowered to a certain height, and a three-dimensional entity is generated by layer-by-layer exposure and lifting. The DLP 3D printer has many advantages over other types of printers. Today I would like to recommend a DLP 3D printer to you.

What is the difference between Anycubic Photon Ultra 3d resin printer?

 

Dlp 3d printer vs Lcd 3d printer
Dlp 3d printer vs Lcd 3d printer

Anycubic Photon Ultra is a breakthrough desktop DLP 3D printer, jointly designed and built by Anycubic and Texas Instruments (TI). Quality 3D printing. The new machine eschews LCD technology in favor of the latest DLP chips from Texas Instruments (TI), so it will deliver higher-quality prints with lower power consumption. The Anycubic Photon Ultra has a print volume of 102.4 mm (L) x 57.6 mm (W) x 165 mm (H) and uses a new DLP screen from Texas Instruments (TI) capable of printing at 720p resolution. The Photon Ultra is reported to have a light efficiency of 40%, which is 15 times higher than the 2.5-3% light efficiency typically used by LCD printers. However, machines use far less energy. The printer consumes 0.017-0.034 kWh for every 100mm of the model printed. Low power consumption means less heat is dissipated, so fewer cooling fans are used and the printing process is quieter.

We can use three keywords to describe the Anycubic Photon Ultra 3d resin printer, namely high precision, durability, energy saving, and environmental protection. This printer is durable. Because it benefits from the blessing of DLP technology, the light source system of Anycubic Photon Ultra does not need to be replaced as often as traditional LCD 3D printers. The light source system of the DLP 3D printer is the DLP light machine, which can project a higher uniform molding surface. The uniformity of the light is greater than 90%. The light beam is only projected in the area where the resin needs to be cured, and the distortion is small, without light leakage or blurred edges. The printing is finer and the details are clearly portrayed.

The Anycubic Photon Ultra 3d resin printer weighs about 9 pounds, which is not very heavy. It does feel very stable, also it’s only got a single rail. You may know that most machines in this size only have a single rail. The build volume is 102.4×57.6×165mm. 

The Anycubic Photon Ultra 3d resin printer uses a laser engraving printing platform. The bottom of the printer platform adopts a laser engraving process, which increases the plane adhesion and improves the printing success rate. Then the power and USB are on the side of the printer. There has any networking. The vat feels like very high-quality plastic. Let’s see. There are fill line indicators on both sides of that, which is actually kind of nice. 

The summary of the Anycubic Photon Ultra 3d resin printer.

The printing speed of this printer is fast. Thanks to the strong and stable light source of the DLP light machine, the Anycubic Photon Ultra only takes 1.5 seconds to print each layer, which is 1/5 of the 8 seconds per layer of the original Anycubic Photon; the total printing speed can be up to 6 cm per hour, which is faster than The original Anycubic Photon was 3 times faster at 2 cm per hour and 50% faster than the competition’s 4 cm per hour.

In addition, the Anycubic Photon Ultra 3d resin printer is low-power, energy-saving, and environmentally friendly. AnycubicPhotonUltra has the characteristics of low power. The overall power is as low as 12W, which is equivalent to the power of ordinary light bulbs, which is only 1/5 of the 60W power of LCD3D printers. Let us contribute to energy saving and emission reduction.

This printing technology can be applied to movie figures, jewelry, dental applications, household products, architectural models, and model decorations.

It’s a runner-up. If you’re only printer at your first printer, I don’t think you’re going wrong, you’re still going to get really good prints off it. Your figures are going to look good. 

RELATED ARTICLES

Epax E6 mono review
Epax X1K review